Ubuntu配置防火墙iptables重启生效(常见iptables的用法记录)

基于服务器的安全考虑,我们需要在Ubuntu 18.04环境中进行配置iptables防火墙,这里老蒋简单的记录iptables的常规用法。一般我们都是在需要服务器的ROOT权限下进行的,有些服务器环境默认是安装过的,我们需要检查到底是否有安装,如果有安装过,直接就添加防火墙规则。

第一、检查是否安装iptables

# 检查
# which iptables
/sbin/iptables
# whereis iptables
iptables: /sbin/iptables /etc/iptables /usr/share/iptables /usr/share/man/man8/iptables.8.gz

第二、安装iptables

如果没有安装的话,我们则需要安装。

# 进行安装
sudo apt-get install iptables

第三、如果安装过我们创建规则

vi /etc/iptables

我们添加规则。

*filter
:INPUT DROP [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:syn-flood - [0:0]
-A INPUT -i lo -j ACCEPT
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 443 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 3306 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 8080 -j ACCEPT
-A INPUT -p tcp -m state --state NEW -m tcp --dport 7070 -j ACCEPT

-A INPUT -p icmp -m limit --limit 100/sec --limit-burst 100 -j ACCEPT
-A INPUT -p icmp -m limit --limit 1/s --limit-burst 10 -j ACCEPT
-A INPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,ACK SYN -j syn-flood
-A INPUT -j REJECT --reject-with icmp-host-prohibited
-A syn-flood -p tcp -m limit --limit 3/sec --limit-burst 6 -j RETURN
-A syn-flood -j REJECT --reject-with icmp-port-unreachable
COMMIT

然后保存规则

iptables-save > /etc/iptables

第四、创建规则确保重启也执行iptable规则

vi /etc/network/if-pre-up.d/iptables

第四、创建规则确保重启也执行iptable规则

vi /etc/network/if-pre-up.d/iptables

添加:

iptables-restore < /etc/iptables

保存退出。

第五、查看防火墙规则

iptables -L

这里我们可以看到所有的防火墙设置。

Chain INPUT (policy DROP)
target prot opt source destination
ACCEPT all -- anywhere anywhere
ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:http
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:https
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:mysql
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:http-alt
ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:7070
ACCEPT icmp -- anywhere anywhere limit: avg 100/sec burst 100
ACCEPT icmp -- anywhere anywhere limit: avg 1/sec burst 10
syn-flood tcp -- anywhere anywhere tcp flags:FIN,SYN,RST,ACK/SYN
REJECT all -- anywhere anywhere reject-with icmp-host-prohibited

Chain FORWARD (policy ACCEPT)
target prot opt source destination

Chain OUTPUT (policy ACCEPT)
target prot opt source destination

Chain syn-flood (1 references)
target prot opt source destination
RETURN tcp -- anywhere anywhere limit: avg 3/sec burst 6
REJECT all -- anywhere anywhere reject-with icmp-port-unreachable

一般情况下,就这么用的。具体的iptables的配置,我们可以根据需要进行端口设置。参考:

 

文章来源:

https://www.itbulu.com/ubuntu-iptables.html

版权声明:
作者:John
链接:https://vps.la/2022/02/23/ubuntu%e9%85%8d%e7%bd%ae%e9%98%b2%e7%81%ab%e5%a2%99iptables%e9%87%8d%e5%90%af%e7%94%9f%e6%95%88%ef%bc%88%e5%b8%b8%e8%a7%81iptables%e7%9a%84%e7%94%a8%e6%b3%95%e8%ae%b0%e5%bd%95%ef%bc%89/
来源:VPS啦
文章版权归作者所有,未经允许请勿转载。

THE END
分享
二维码
< <上一篇
下一篇>>